HEPA filtered
Glove Box
(Level III)


Class 100 Recirculating
Air Flow Glovebox
(Level II)


Recirculating
Containment System
Level II Sampling Booth


Downflow Booth
(Level II)


Reverse-Flow Series
Particle Entrapment
Units
(Level I)


You may request additional information on any of our products by sending us an information request.
 


 


Air Control has been a leading supplier of systems to the clean air and controlled environment industry since 1959. We offer unparalleled experience in the design and manufacture of containment equipment, and are innovators in the field of Barrier Isolation Technology.

There is an ever-increasing emphasis on the need for reliable, dust-free, sterile environments for industries such as the pharmaceutical, biotechnology, and textile industries. MICROVOID® clean air systems provide assured operator protection from hazardous powders, chemical vapors and fibers, as well as ultra clean conditions for critical processes.

MICROVOID® containment equipment is designed to achieve validated levels of potent substance control, providing protection for people, product and the environment, all while removing risks of product cross-contamination.

MICROVOID® builds and supports containment systems for all applications across the HIERARCHY OF TECHNOLOGIES spectrum shown below.

HIERARCHY OF TECHNOLOGIES

Classification Technologies Effectiveness Level*
Level III (<1 mg / m3)

High Toxicity

Closed System

Barrier

<1.0 m / m3

<10 m / m3

Level II (1 - 100 mg / m3)

Moderate Toxicity

Directional Laminar Flow

Laminar Flow

Local Exhaust

10 m / m3

30 m / m3

50 - 100 m / m3

Level I (>100 mg / m3)

Low Toxicity

General Exhaust

 

>100 m / m3

 

*Based on levels achieved in normal operating conditions with trained operators following procedures.

In a MICROVOID® clean containment system, HEPA filtered clean air pushes contaminated particles down and away from the operators breathing zone, providing ultra-clean breathing air. The contaminated air is then filtered and recirculated, eliminating the need to exhaust costly conditioned air.  Hazardous particles are captured within a "safe change" filtration system.  Fixed workstations and localized barriers are engineered into the system to facilitate productive working conditions and minimize operator mistakes.

MICROVOID® systems are engineered, constructed and tested under the highest quality control standards.  Materials of construction include stainless steel, cold rolled steel, safety glass and polymers. Filtration systems will be selected depending on the characteristics and volumes of materials being handled. Filter options include HEPA bag in/bag out, and charcoal filters.

MICROVOID® containment equipment ranges from low cost tabletop units to custom designed mini-environments. All models are flexible and can be portable. For over 40 years MICROVOID® has been designed with the reliability and performance characteristics that have made our units the recognized quality standard in this field!

Other MICROVOID® containment equipment

  • Inexpensive acrylic glovebox.
  • Reverse-flow series of particle entrapment units.
  • Portable Class 100 powder containment booth.